1-1/8" Moto Bars for use with Stock Harley Hand Controls
These moto style bars feature the typical 1-1/8" riser clamping area but taper down to 1" to accommodate stock Harley hand controls and feature the ability to run Throttle By Wire (TBW) and regular cable throttle. They are pre-slotted for internal wiring. Bars are 32" wide, pullback is 3" and rise is 2.5"
These bars work with Kraus 1-1/8" Isolated Risers. When ordering the Isolated Riser select 1-1/8" for the Bar Clamp Size (NOT 1").
We do our own machining operation on these bars so that they are compatible with the wiring slot of our Isolated Risers. Do not work with heated grips
Throttle By Wire ready
Works with regular cable throttle
Do not work with heated grips
If you plan to run stock 2014 up switch housings with these bars you will need to change your master cylinder and clutch perch clamps to early model clamps Harley OEM part #45138-08A
Colors other than black may be special order with a lead time of 1 week.
The gold, silver, red and black anodized are susceptible to color fade when exposed to sun-light. We recommend powder coated bars for the best longevity.
Finish options include gold black or silver anodized
The Batwing ERG Bar Kit is our recommended setup for your Batwing bagger. The T-Rex Pull Back Plate puts the risers and bars 2.5" closer to the rider to get your moto bars and risers in the right location. Your choice of 6", 8", or 10" straight Isolated Risers and the ERG Moto Bars that are designed for pure individuality.
Fine tune the angle and sweep of your bars to fit your body and riding position. Simply loosen the clamp bolts and swivel the knuckles into that perfect position releasing strain on your elbows and wrists.
Positioning your hands, arms and body mass in the perfect position increases your bodies core maneuverability thus optimizing control of the machine and providing comfort and performance.
A great handling bike starts with ergonomics and body position. It doesn't matter how fast your bike will go or how fast you can stop if you don't have comfortable control over your machine you don't have real performance.
See what the team at Moonshine Harley has done using the Kraus riser handlebar setups.
ERG Adjustable Moto Bars - Black Anodized
Kraus Isolated Risers - Choice of 6˝, 8˝, or 10˝ Riser / Fitment: 1˝ Bar Clamps
T-Rex Pull Back Plate - Black Anodized / Fitment: Bagger
The total hand position height of this setup measured from the top of the stock triple tree listed below.
6" Riser option = 11.5" total
8" Riser option = 13.5" total
10" Riser option = 15.5" total
Note: When running the T-Rex pullback plate you can not use your stock Key Switch/Steering Lock so you will need to relocate the switch. Check with your local shop or dealership for options. Some bikes can be reprogrammed with a CVO Flash to not need the key switch at all. Suggested for use on Street Glides and Electra Glides but can also be used on other Harley's including Road Glides, Softails and Dynas.
If you're looking to keep your Road Glide stock plastic gauge cover (Nacelle) and just add a MotoBar & Riser setup then this is the setup for you.
The Road Glide Pro Kit offers everything you need in one easy package.
This setup bolts directly to your stock triple tree and relocates your risers so they will clear your gauge pod. (Some modification of the Nacelle is needed) The raptor plate and Kickback risers together off a total of 3" of pullback which creates a very comfortable riding position.
A great handling bike starts with ergonomics and body position. It doesn't matter how fast your bike will go or how fast you can stop if you don't have comfortable control over your machine you don't have real performance.
See what the team at Moonshine Harley has done using the Kraus riser handlebar setups.
Kraus Kickback Isolated Risers - 8˝, 10" or 12˝ / Black Anodized
Raptor 1-1/2" Pull Back Plate - Black Anodized / Fitment: All Touring, 2018 and Up Softail
1-1/8" FM Fly Moto Style Black Powdercoat Bars for Stock Harley Hand Controls or anodized black 1-1/8" ODI Podium V-Twin / Moto Handlebar (1" Bar Size is Temporarily Unavailable)
Optional RG Billet Gauge Bezel
The total hand position height of this setup measured from the top of the stock triple tree is listed below:
The Wolf One Pro Kit is the top of the line, giving you a high class all billet performance setup. The Kickback Isolated Risers and Fly Moto Bars offer an aggressive upright body position. The RG Billet Gauge Bezel and Wolf One Top Clamp allows you to get rid of your cheap looking plastic Nacelle (gauge housing)
The Wolf One Pro Kit offers everything you need in one easy package.
This setup replaces your OEM Top Triple Tree and has a total pullback of 1.5" in the risers. The Gauge bezel can be optionally mounted in the front or rear of the risers.
Your top Tree Clamp is an essential part of a performance front end setup. The Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your Triple Tree setup will absorb the abuse of hard use.
FM Fly Moto Style Bars require the purchase of Pro-line Perch Half Clamps. Can be used with existing OEM Harley handlebars.
See what the team at Moonshine Harley has done using the Kraus riser handlebar setups.
Wolf One Billet Bagger Top Clamp - Black Anodized / With Lock
Increase rider comfort and control with the One Floor Boards.
Designed for Aggressive Comfort, the One Floorboards are adjustable 1" forward to rear so you can get your legs and feet in the correct position depending on your body and riding style. With the boards in their rear most position it gives the rider the feel of mid-controls but still retains the comfort of a full size board
The light weight Aluminum boards have replaceable slippery Delrin Sliders on the outer most edge so you won't destroy your boards on the tarmac when you're digging deep in the corners.
This is the One Performance Floorboard
Light Weight Aluminum construction
Adjustable forward to rear by 1 inch
Replaceable Delrin Slider
Offered in Machine Black Anodized or Polished finishes
All Harley Bagger Models 1982 to 2021
Softail Models 1986 to 2017 with factory floorboard mounts
Increase rider or passenger comfort with a larger foot platform
Designed for Aggressive Comfort, the One Mini Boards are adjustable 1" forward to rear so you can get your legs and feet in the correct position.
The light weight Aluminum Mini Boards offer a solid platform.
Great for Longer Rides.
For 2018 and Up Softails Fitment select 2018 and Up Option below. For all other bikes including Dynas, Sportsters, FXR, Early Softail models and Bagger Passenger mounting select Universal HD option.
Light Weight Aluminum construction
Adjustable forward to rear by 1 inch
Adjustable mounting angle
Offered in Machine Black Anodized or Polished finishes
Universal HD Fits models with H-D male mount footpeg supports.
The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so...
The new Kraus Pro-Line dash components look great with our Isolated Risers. Tie it all together for that clean look on your Harley Davidson. Our new...
These perch half clamps are the newest addition to the Kraus Pro-line product line. These Pro-Line Half Clamps are designed and machined to the Kraus high standards and offer a replacement to the Harley stock half clamps when running aftermarket bars.
Keep a clean and precise look while securing the handlebar master cylinder and clutch control.