The Raptor Pull Back Plate is for Road Glides.
It moves the bar mounts back towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges.
The risers solid mount to the stock or aftermarket triple trees and the risers solid mount to the Raptor Plate so we recommend running Kraus Isolated Risers with this setup for Vibration Damping.
This also improves bar position when using Motocross style bars.
Holes will need to be cut in the Nacelle for the risers to protrude or use our Billet Gauge Mount and get rid of that stock plastic Nacelle all together.
On 2014 and up models the stock Key Switch/Steering Lock will interfere and can not be used so you will need to relocate the ignition switch. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all with the Harley CVO Flash.View full product details
The T-Rex Pull Back Plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5". This allows you run straight risers or T-Bars on a Street Glide. The T-Rex plate adds 1" of height.
When running the T-Rex pullback plate you can not use your stock Key Switch/Steering Lock so you will need to relocate the switch. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all.
Suggested for use on Street Glides and Electra Glides but can also be used on other Harley touring bikes including Road Glides.
View full product details